The right vacuum for builders dust (and why HEPA isn’t enough)
Fine building and renovation dust wrecks ordinary vacuums. Here’s what dust classes mean, what WorkSafe Queensland says, and two Kärcher machines compared side by side.
The short answer
Use a dust-class vacuum: M class at the least, H class where you can. On Queensland work sites, the silica code says to clean up settled dust with an H class vacuum where that’s practicable. A household vacuum isn’t built for this dust, even with a HEPA filter. Save the cordless stick for the last touch-up.
Builders dust is one of the hardest messes there is. It’s so fine it slips through ordinary filters, it clogs the ones that do catch it, and it settles again for days after the work stops. Some of it, like dust from cutting concrete, tiles or stone, contains silica, which is a real health risk.
That’s why the vacuum matters more here than anywhere else.
Why ordinary vacuums give up
A household vacuum is built for crumbs, hair and everyday dust. Builders dust is much finer and there’s far more of it. Three things go wrong:
- The filter clogs. Fine dust packs into the filter fast, and suction drops off a cliff.
- Dust leaks out. Household machines aren’t sealed for hazardous dust, so the finest particles blow straight back into the room.
- The bin fills in minutes. Small bins and bags can’t keep up with a renovation.
Dust classes: L, M and H
In Australia, vacuums and dust extractors for workplaces are rated to a standard (AS/NZS 60335.2.69) that sorts them into dust classes. The class is printed on the machine.
| Class | Built for | Maximum leak rate |
|---|---|---|
| L (low hazard) | General dust, light site cleaning | Under 1% |
| M (medium hazard) | Most construction dust, including concrete, plaster, tile and wood dust | Under 0.1% |
| H (high hazard) | The most dangerous dusts, including work on engineered stone | Under 0.005% |
M-class machines must also warn you when airflow drops too low, which tells you when the filter needs clearing.
L class v M class: two Kärcher machines side by side
The class makes more difference than the brand. Here are two Kärcher wet and dry vacuums, one L class and one M class, using Kärcher Australia’s own specs.
| Spec | NT 27/1 | NT 30/1 Tact Te M |
|---|---|---|
| Dust class | L (Kärcher lists the cartridge filter as L certified) | M (99.9% tested filtration) |
| Made for | Wet pickup, general debris, lime and gypsum dust | Concrete, brick, tile, hardwood and paint dust |
| Filter cleaning | By hand (the cartridge filter is washable) | Automatic (Tact) |
| Container | 27 L | 30 L |
| Air flow | 72 L/s | 74 L/s |
| Suction | 249 mbar | 273 mbar |
| Hose | 2.5 m | 4 m, antistatic |
| Power tool socket | No | Yes, starts with the tool |
| Floor tool | 300 mm wet and dry | 360 mm wet and dry |
| Weight | 7.1 kg | 14.2 kg |
| Noise | 71 dB | 69 dB |
| Price seen | $539 | $1,398 |
Specs from Kärcher Australia’s pages for the NT 27/1 (1.428-508.0) and the NT 30/1 Tact Te M (1.148-246.0). Dust uses from Kärcher’s dust extraction page. Prices seen at one Australian supplier on 11 November 2026, so shop around.
What the difference means on a job:
- L class suits wet pickup, general debris and lime or gypsum dust, according to Kärcher. Concrete, brick, tile and stone dust need M class or better.
- M class is what Kärcher calls the minimum legal requirement on a construction site. Automatic filter cleaning keeps the suction up in fine dust.
- H class is the step up. Kärcher’s H class model in this range is the NT 40/1 Tact Te H, rated at 99.995% filtration.
- Cost and weight: the M class machine costs about two and a half times as much and weighs twice as much. On a site full of fine dust, that’s money well spent.
What these machines are like to use day to day, and how they compare with Kärcher’s yellow home models, is in Wet and dry vacuums: Kärcher home or pro?
What WorkSafe Queensland says
For workplaces, WorkSafe Queensland says vacuums used to control silica dust on construction sites must be fit for the job, and that general-purpose vacuums aren’t designed for hazardous dust, “even those fitted with a HEPA filter”. It lists M-class or H-class for construction dust from power tools, and H-class for stone benchtop work. It also says emptying the vacuum must not put the dust back into the air.
For cleaning up settled dust once a task is done, the code goes further. An H class vacuum should be used where it’s practicable, and a business that uses M class has to be able to justify why H class wasn’t. Source: WorkSafe Queensland’s page on the construction silica code.
Queensland’s silica code of practice for construction has applied to all construction work since 1 May 2023. Sources: WorkSafe Queensland on dust extraction and respirators and the 2022 silica code.
If you’re a homeowner cleaning up after your own renovation, those rules aren’t written for you, but the dust is the same. The same kit protects your lungs.
What to look for
- An M or H rating on the machine. The rating covers the whole machine. A “HEPA” label only covers the filter.
- Filter cleaning. Automatic or push-button filter cleaning keeps suction up without stopping to tap the filter out.
- Sealed disposal. Bags or liners that close before you take them out, so the dust stays in.
- An antistatic hose. Fine dust builds up static, and the shocks get old fast.
- A low-airflow warning. Standard on M-class, and it tells you when to clear the filter.
- Wet and dry. Handy when plaster slurry or water is part of the mess.
- A tool socket, if you’ll run it off a saw or sander, so it switches on with the tool.
- Weight and noise, if you’ll carry it up stairs or work in an occupied building.
Which type suits which job
| Machine | Good for | Not for |
|---|---|---|
| M-class extractor (corded) | Bulk dust on site, tradies and cleaners | Quick touch-ups in a finished home |
| H-class extractor | Engineered stone and the most hazardous dusts | Everyday use (it’s overkill) |
| Cordless M-class | Small jobs and rooms with no power yet | A whole house of heavy dust |
| Backpack vacuum | Stairs, apartments, moving fast | Heavy construction dust, unless it carries an M rating |
| Cordless stick | The final touch-up once the heavy dust is gone | The bulk of the dust (it clogs fast) |
Brands like Festool, Makita, Bosch, Kärcher, Hilti and Nilfisk make M-class machines. Check the class on the exact model you’re looking at, because the same brand often sells L, M and H machines.
Cleaning up after a home renovation
- Don’t dry sweep fine dust. A broom puts it back in the air.
- Vacuum first, then wipe, then mop. Water turns fine dust into paste.
- Work top to bottom, so dust falls onto areas you haven’t done yet.
- Wear a P2 mask and keep the area ventilated.
- Expect a second pass. Fine dust keeps settling for a day or two.
The full step-by-step is in How to clean up builders dust after a renovation.
If the job is bigger than a weekend, a professional builders clean may be worth it. On the Gold Coast, my business CleansePro does builders cleans.
How this guide was written. Based on builders cleans, which are most of my work, plus WorkSafe Queensland guidance, the Australian dust class standard and Kärcher’s Australian product sheets. Drafted with help from AI tools, then checked and finished by me against what I see on the job. How I choose